Shipping Container Terrain Print-In-Place Working Doors
Description
Shipping container terrain written in cadquery. The container is printed in one piece with two working hinges and doors. I made two different variants one with greebles and the other plain. --- For more details and part specs go here: https://miniforall.com/shippingcontainer This is an open source project that you can customize: https://github.com/medicationforall/cqportal You can support this project and other projects I'm working on at patreon: https://www.patreon.com/medicationforall --- ### Greebled Container * Length - 150mm * Width - 75mm * Height - 75mm * Weight - 117grams * Print Time - 16 hours 50 minutes * Layer Height - 0.2mm * Infill - 10% * No Supports * to fit the model on 200x200mm print bed, I printed the model with the doors up. * I print with a brim of about 3 lines because the closed door contact is very small on the base ### Plain Container * Length - 150mm * Width - 75mm * Height - 75mm * Weight - 115grams * Print Time - 15 hours 18 minutes * Layer Height - 0.2mm * Infill - 10% * No Supports * To fit the model on 200x200mm print bed, I printed the model with the doors up. * I print with a brim of about 3 lines because the closed door contact is very small on the base
Statistics
Likes
0
Downloads
0