Master Cylinder Cap for Pressure Bleeding - With Schrader Air Valve Fitting. Fits all 50mm ID with 3 Tabs - 350Z, BRZ/GT86
Description
Master Cylinder Cap for Pressure Bleeding your Brake Calipers. Should fit all caps with 3 locking tabs and 50mm ID. Will need to cut rubber gasket material for a proper seal - 49mm OD, 2-3mm thick. Adjust thickness until you get a proper seal. I used a 2mm and a 1mm for a tight seal. Just connect a simple tire pump, set it at 15PSI and open the bleed nipples. Ensure fluid level stays above minimum mark. I ran the tank from Max to Min through each nipple on my Brembo Calipers.
Statistics
Likes
0
Downloads
0