Johnybee180 FPV Quadcopter
Description
Johnybee180 Is A Mini 180 Size Fpv Racing Quad Which Is Easy To Print & Build And Very Funny To Fly Due To Its Size And Agileness. You Can Squeeze It Through Every Hole :) When Printed In Abs With 100% Infill It'S Also Very Rigid And Will Survive A Lot Of Crashes. Frame Weight Is About 60 Grams (Abs, 100% Infill), Auw With Fpv Gear And 3S Lipo 850 Mah Is About 300 Grams. My Recommended Setup: Motors: 4X 1806 2280Kv (Or 1306 3100Kv) Escs: 4X Dys Sn16A (Or Similar Size And Amps) Flight Controller: Cc3D Atom (Or Naze32) Propeller: 4045 (Or 4045 Bullnose) Battery: 3S Lipo 850-1000 Mah Fpv Camera: Dal 700Tvl Video Tx: Ts5823 200Mw Software: Blheli14.1 Firmware For Escs + Damped Light Mode + Oneshot125 Cleanflight Luxfloat Controller Pids: Roll/Pitch: 2.5, 0.040, 30 Yaw: 8, 0.040, 5 Looptime: 1600 With This Setup You Can Have A Greatly Flying Mini Quadcopter For About 110 Usd Including Fpv Gear (Aliexpress, Banggood). There Is Also A Bigger Version For 5" Propellers (Http://Www.Thingiverse.Com/Thing:1069161) And Smaller For 3" Propellers (Http://Www.Thingiverse.Com/Thing:1091279). Have Fun!
Statistics
Likes
164
Downloads
0