Slonik Gen2 & Gen3 Flashlight Mount for Helmets & NVG Dovetails
Description
Helmet mount for the Slonik Gen2 & Gen3 LED flashlights on any dovetail style NVG mount. Seen here on my replica FAST bump helmet. It also fits in the case with the rest of the accessories. You will need supports in the slider slot. Easy to paint on if using PrusaSlicer or a fork. <b>Parts Needed:</b> 4x M3x8mm Button-Head Screws 4x M3x12mm Socket-Head Screws 1x 3x10mm, 0.4mm wire diameter spring (same as an airsoft hopup unit). 1x M3x5mm Grub Screw (Any OK) And 1 of each printed part, except the clamp block. You need two of those. <b>Assembly Instructions</b> 1. Glue the spring into the round cavity on the rear of the lock tab. This makes it easier to manipulate. 2. Insert the lock tab spring-first into the slider slot, then secure it by screwing the M3x5mm grub screw into the hole on the underside, through the capture slot on the back of the mounting plate. 3. Secure the flashlight mounting bracket to the mounting plate with 4x M3x8mm button-head screws. You can generally force-thread these without the need for a tap. Make sure the side with the holes closest to the edge are up against the lock tab area. 4. Secure the flashlight in place using the M3x12mm screws and the clamping blocks. Do not overtighten these, just snug so the flashlight doesn't rotate without applying some force.
Statistics
Likes
0
Downloads
0