Extruder cooling Sovol SV04
Description
The reason for this is that the cooling is not enough when printing with higher temp material like Nylon. (My SV04 is modified to get over 300 deg C) Heat creep sets in and better cooling is needed. This is using a radial fan instead of the small axial flow that is standard. An radial fan can move a lot more air. The size is 4020 and is available everywhere online. The fan holder reaches a little bit below the aluminium cooling fins. This is to let the air pass over the part of the heat break that is open and by that cool it even more. Must be printed in Nylon or ASA. Preferable with carbon fibre.
Statistics
Likes
0
Downloads
0