SSD1306 OLED panel for Neopixel stand
Description
So huge thanks to [Caliandrias](https://www.thingiverse.com/Calandrias) and [Nan_1](https://www.thingiverse.com/Nan_1) for providing the things for me to hack! I modified the central plate ('NeoPixel_Label.stl') in the NeoPixel Ring 24 Stand so that I could mount an oled panel in it. In my use case, I use esphome & Home Assistant, and the NeoPixel ring lights the left hand half circle of 12 LEDs in various colours from yellow to red as grid power is consumed, and on the other side the 12 LEDs represent how much power is being generated by my solar panels in colours from blue to green, with each LED rounded to the nearest 1kW up to 12kW eg 8 lit LEDs indicates somewhere from 7500 to 8499W. The central display currently just shows the actual solar being generated, but I might change that to cycle through other info such as total solar generated etc. Note that all I did was get the display frame and, using Tinkercad, lay that over the central plate and use the 'hole' option to effectively punch a hole through the plate for the screen. Speaking of which, I also had to slightly change the size of the plate as my screen was slightly smaller than the one used in the original frame.
Statistics
Likes
0
Downloads
0