ISpec EV to 22.2mm Bar Clamp - M5 Heat Set Insert
Description
This is a remix of virtikas ISpec EV to 22.2mm handlebar clamp adapter. This simply widens out the interface for the ispec-ev shifter/dropper lever to allow you to drop in an M5x8x7 heat set insert so you don't need to rely on plastic threads or an M5 tap. 22.2mm bar clamp to mount an I-Spec EV shifter or dropper lever. Requires: * 1x M4x15mm bolt + M4 nut (to clamp to the handlebar) * 1x M5x12mm bolt + washer (to secure the ispec remote to the 3d printed clamp M5 insert) Print with 4+ wall thickness and 100% infill. You may find it difficult to get the M4 nut into the recess if your printer calibration is a little off - I printed it at 100.8% scale to account for this.
Statistics
Likes
0
Downloads
0