Sapphire PRO swap head V2
Description
This design is based on my previous design of the swap head which I use now, but wanted to improve it slightly. This is work in progress so minor changes may be in the future. Gantry files seems to be ok. Motors are brought to the back of the printer and the stress caused by the belt tension on the shaft of the motors is reduced. Table needs to be moved to the front of the printer by 40 mm approx. Head design is missing the better cable management and hotend postion may change in future. BL touch compatible. Actual design reduce X displacement by 20 mm approx. For the extruder please see https://www.thingiverse.com/thing:4885031 For the others extruders feel free to create an adaptor plate. Brass tube with 5 mm OD needed as well as 10 pulleys without teeth and 2 pulleys with teeth. Belt lenght is slightly longer than the original. More detailed instructions and assemblies will/can be provided in the future. Feel free to ask questions if interested.
Statistics
Likes
0
Downloads
0