SD card holder Zippo style
Description
Holder for SD cards and microSD adapters made in Zippo style. The container has 4 card slots. When opened, the cards rise up in steps. Assembly. The holder consists of 5 parts. First install all the internal elements, then install the side wall. The side wall is attached using regular filament (the holes for the filament are 1.8mm). I also used glue. 3D printing settings All models are already rotated for optimal printing. I printed PETG; layer height 0.2mm; 3 walls; filling 10%; all parts are printed without supports; The Cap part must be printed with supports.
Statistics
Likes
0
Downloads
4