K8200 adapter
Description
This adapter exists of two pieces, shell lid and dovetail lid mount.The original SAWoosh shell is used. This remix fits the standard K8200 extruder mount, along side a fanned V5 hot end. Distance to the hot end fan is about 5mm. The lid piece has openings for guiding the wiring. The dovetail piece is screwed on first using the two existing hex socket screws, dovetail facing the back. Then the combined lid piece and shell with probe is attached to the dovetail piece. Fits the cheap 3DTouch. Print settings PLA+, 215/50 C, 50mm/sec, 0,2mm layer, 40% infill coaxial/cubical. Dovetail has a tight sliding fit. Good luck!
Statistics
Likes
0
Downloads
0