Cute and Cozy Mix-and-Match Mushroom Lamps (LEDs Only)
Description
Add a unique and cozy glow to your rooms with fun mushroom lamps and change the colors to fit your mood with swappable shades and bases. Two different sizes with two styles of shades and bases each means lots of room for customization and it's easy to match any room in your home with the filaments of your choice. The large lamp base is designed to fit the LED lamp kit from Bambu Labs Makerlab (MakerWorld LED Lamp Kit 001), and the smaller lamp base can fit a small LED bulb lamp kit (I used a bit of hot glue to stabilize the bulb but it is optional) - or you can use fairy lights or even tea lights for either size. The LED bulb kit and fairy lights I used in the smaller pictured lamps are below (from Amazon): https://a.co/d/ji0ypsT 2 meter USB fairy lights https://a.co/d/eeI8wFI LED Bulb Lamp Kit Model designs include parts initially created in MakerWorld-Make My Vase (https://makerworld.com/makerlab/makeMyVase) and then edited/transmogrified in Tinkercad. IMPORTANT PRINT INFO: Set infill at 0% for shades to allow more light/glow through- higher infill makes them stronger but allows less light through. All lamps pictured were printed at 0% for shades and 5% for bases. Bases can be done at less, but will let more light through and show more of the internal supports. Also strongly recommend using tree supports for the shades- you may want to manually edit the supports to ensure the upper overhang/brim of the shades are supported. For easier support removal, set tree brims at 3mm, the tree support branch diameter to 1mm, and both Top and Bottom Interface layers at 1. Recommend using adaptive and then smooth under the Layers function/option for shades and bases- especially the smooth shades. Smooth shades will have some texture (shown in pics) but can be sanded later to reduce if desired. Print lamp bases upside down (disc flat on plate).
Statistics
Likes
0
Downloads
0