AlfaRC Jaguar GS drone frame accessories

AlfaRC Jaguar GS drone frame accessories

Description

Sharing the 3D models I made for my drone shown in this reddit post https://www.reddit.com/r/fpv/comments/1el9uah/first_drone_build/ - Anti-wiggle plate print recommendations can be found on print settings. - Camera housing was designed originally for a Caddx Ratel 2 FPV camera with a 28deg angle and with a slight forward offset as mounting the camera at the intended position obstructed the fov too much. You'll need additional mods to secure the camera, I personally used the camera's bracket with holes drilled on. - Blank design added if you want to add your own visuals. - Printing face up offers best quality from testing. - VTX mount is a work-in-progress designed for HGLRC Zeus nano VTX w/ 25.5mm M2/M3 mounting holes. - Current impression is to make it thicker to prevent flexing. Also don't know if the PLA can actually handle the heat. So, use with caution. Feel free to remix as much as you want. Let me know how it turns out!

Statistics

Likes

0

Downloads

0

Category

R/C Vehicles

Tags