Evoguide ED50 Clamprings and accessories bars
Description
This is a full kit of Tube rings and accessories for the Evoguide ED 50. I was sick and tired of adjusting the original clamp ring bolts to align it all the time, so I designed my own and wanted a low profile so that it coud carry a PI/minicomputer, guideing etc. I did not make a bracket for autofocus since the backlash of the scope is huge and makes it hard to dial in. Unless you dont like the height , I would suggest to either raise the space between the tube ring handlebar mount and the handlebar for more space to your fingers, current space is now 15 mm. I have included STEP files in case you want to change some details. All holes are 3.2 mm and can be threaded with M4 , I have done this and it workes fine, if you will have threaded incerts, teh holes might be needing adjustments. ( i used through bolts on the hinges , M3 mm and washers . Enjoy and clear skies :-) STL files from Prusa Slicer for Anycubic Kobra 2 Plus, so you need to slice them to your printer. I printed mine in Silk PLA, but Carbon fiber PLA or Pet-g might be a better way to go. My work like a charm . :-)
Statistics
Likes
0
Downloads
0