Drill stand adaptor for a soldering Iron
Description
With this device I can press in brass inserts straight. This is a adaptor for a cheap (1,69€) chinese soldering iron and a Drill stand "ZBS 2" with 72mm diameter. The cut in the middle is 0.2mm wide, if there are in the inside no seam or aligned seams, then you can get it apart very easy. You have to buy such a soldering iron and replace the soldering tip with a brass adaptor (2-3€) for the inserts which came with a M2, M3, M4, M5 and M6 adaptor. Orca Slicer settings - Seam position: Back - Infill: 15% Honeycomb
Statistics
Likes
0
Downloads
0