Mussy X-Bow Dual Band Mod
Description
Work in progress, untested, But currently printing to try within the next few days. Will need 4- M6x15 And 2- M6x20 hex headed bolts. twice as much banding as the original design, instead of using the plastic pieces you slip the band onto, Which is an absolute pain in the rear. You will wet the inside of the band with alcohol and slide it onto the screws up to the head, then pinch that between the arm and the mounting plate and withten, this should help secure them to the bow itself. Afterwards, use paracord between the two loops of the rubber, making yoiut standard finger pull too. will need approx 300mm bands x2.
Statistics
Likes
0
Downloads
0