Alternate head for Comgrow T500
Description
THE T 500 IS A FANTASTIC MACHINE BUT THE HOT END AND EXTRUDER UNFORTUNATLY ARE JUNK AND HARD TO GET PARTS FOR. THIS IS AN ALTERNATE HEAD YOU CAN PRINT YOURSELF. IT UTILIZES PARTS COMMONLY FOUND ON AMAZON. I'LL LIST THEM BELOW. THE EXTRUDER IS A BMG DIRECT DRIVER EXTRUDER, GREAT FOR TPU AND THE HOT END IS A KNOCK OFF OF THE BAMBU LABS HIGH FLOW HOT END, IT WORKS FANTASTIC. ANOTHER FEATURE IS SIMPLICITY IN MAINTENANCE AND REPAIR. TWO SCREWS TO REMOVE THE FAN SHROUD. TWO SCREWS TO REMOVE THE HOT END AND TWO SCREWS TO REMOVE THE EXTRUDER. YOU CAN REUSE A LOT OF THE HARDWARE ON THE ORIGINAL HEAD. YOU WILL NEED TO EXTEND THE WIRES FOR THE FANS. IVE LINKED A KIT IN THE PARTS LIST BUT YOU'LL HAVE TO SOLDER. YOU WILL ALSO NEED AN ASSORTMENT OF M3 SCREWS https://www.amazon.com/dp/B0CQVBGV6Z/?coliid=I159DJRF64MVPG&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF https://www.amazon.com/dp/B0BG4249XC/?coliid=IJR4RO3OG5EUF&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF_1 https://www.amazon.com/dp/B0CYBLW7RB/?coliid=I3C0EWAR85JFH2&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF_2 https://www.amazon.com/dp/B0CT95TN2G/?coliid=IKO6PNQ9HA02W&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF_3 https://www.amazon.com/dp/B0CN6DDK4B/?coliid=IL29U2AMRYF8L&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF_4 https://www.amazon.com/dp/B013JRWCBU/?coliid=I2UXW77URW2A0R&colid=2OUEWFADZCBO3&psc=1&ref_=cm_sw_r_cp_ud_lstpd_44V22PCZYH05PZSNBGAF_5
Statistics
Likes
0
Downloads
0