Creality K1 / K1C / K1 Max Spool Roller v2
Description
Version 2 of my original Spool Roller. I had a few people comment that they were worried about the spool falling off. I have never had a spool fall of the original spool roller, but I wanted to find a way to address the concerns, while also keeping the aesthetic of the original. The main difference from the original model is that the roller slides through the back of the holder. The plug is keyed with wedges to allow it to be pushed in to keep the roller secure. Like the original, the Spool Holder is oriented standing up with the coupler on the bed, this allows for the least amount of supports needed. You'll need two of the Roller file to make the whole roller. Supports are needed for the Spool Holder, and optional for the Roller. The square key peg and the plug print flat. PRINT SETTINGS I used Orca to slice the model, so keep in mind that these are the settings that worked for me and YMMV. Printed on both my Creality K1 and Bambu X1C with exactly the same results. Quality: Normal 0.2 mm Filament: Polymaker - Polysonic PLA Pro - Black Modified Settings Walls:5 Top/Bottom Pattern: Concentric Bottom Pattern Initial Layer: Concentric Top Surface Skin Pattern: Concentric Infill Density: 50% Infill Pattern: Gyroid Generate Supports: ✔ Support Structure: Tree Slim or Normal (Used Both with similar results Support Pattern: Grid Build Plate Temp: 55ºC (Textured PEI Plate) Build Plate Initial Temp: 55ºC Build Plate Adhesion Build Plate Adhesion Type: None
Statistics
Likes
0
Downloads
0