WPL CX4 Gearbox Riser + Shift Servo Brace
Description
Riser mount for the WPL 2 speed gearbox and brace for the gearshift servo. I used 6xm2 6mm hex bolts, 6x m2 washers and 6xm2 nuts to mount the risers parts through the standard gearbox holes and the regular self tapper plastic screws to mount the gearbox to the risers. I screwed a longer m2 hex bolt, maybe 12mm, through the hole at the base of the servo brace part in order to strengthen it. This might not be necessary as the part is also braced against the inside of the chassi rail but i figured it still put this into the design. Credit to RTR https://www.youtube.com/@RunThatRC for showing how easy it is to raise the gearbox to improve ground clearance and bracing the shift servo to prevent low gear skipping in his WPL C24 kit Revisited video. Credit to Kyron1007 for the model of the chassi rails that let me skip quite a bit of measuring for the holes https://www.thingiverse.com/thing:3423729
Statistics
Likes
0
Downloads
0