Arcade Push Buttons - 18mm to 60mm Diameter Monster Collection
Description
Please allow me to present: --The 3D Printed Arcade Push Button Monster Collection! The button widths (diameters) are 18, 24, 30, 36, 42, 48 & 60mm The control panel or 3DP box material thicknesses catered for are 4, 6, 8, 12, 15, 18 & 22mm If your mounting material is somewhere between, then I have provided washers of 1, 2 & 3mm So that you don't need to route massive holes in your control panel I have limited the hole diameters to 18, 24 & 30mm for the rest. There are 3 parts involved, after deciding the button diameter you require (eg 24) then you need that size push button (eg B24_) followed by the matching casing (eg C24_) and then whatever the thickness of your mounting material, let's say 12mm. So the two stl files required are: B24_12.stl & C24_12.stl The third part required is the standard (~28 x 16mm) micro switch. The idea is that the mounting material is trapped between the lip (or skirt) of the exposed push button and the micro switch below. I make my mounting holes the size I require (eg 30mm for 30mm push button) but this does make them tight to push in, at times requiring a light sanding, obviously you could cut or print the hole a little wider. The micro switches fit snugly into the casing but I did provide side holes if you need to screw or wire tie them in. Any questions or requests, please just ask. --PATREON & PATREON SHOP. --https://www.patreon.com/3DFreeman Thanks for your continued support!
Statistics
Likes
0
Downloads
1