Chemical Mixer
Description
It is a device that allows continuous mixing of various liquids, I use it for mixing sodium persulfate, for etching PCBs, but there are probably other applications, I will not provide assembly instructions, because everything connects logically, and everything is visible in the photos. things needed: -printouts -8x copper thread M3 -2x 625zz bearings (drive the copper thread inside) -1x 623zz bearing -12x screws M3x6 (countersunk head) -4x M3x10 screws -2x screws M3x22-25 -4X sachets M2.5x8 -6x M3 washers -2x M3 nuts (I recommend self-locking) - 4xAA battery compartment -potentiometer (I recommend 5K) -switch (any) -PCB 70x30 (gerber/json/pdf files on cults3d.com) -connecting cables This project took me a lot of time, but I publish the basic files for free, but if you appreciate my work and want to receive additional files (.step + .json + .gerber + .pdf + container.stl), please visit my profile on cuts: https://cults3d.com/en/3d-model/tool/chemical-mixer
Statistics
Likes
0
Downloads
0