KlickyChanger - A toolhead changer whanabe
Description
This is a Remix from Stealthchanger: https://github.com/DraftShift/StealthChanger I made it for my Miniburner XL toolhead, but the backplate can be modified for whatever toolhead you want. I wanted a toolchanger whitout TAP. So I made this project to use Klicky probe. Teoretic it can be modifiet for whatever probe you want. The X endstop is on the shuttle, exact like on the original Voron Carriage. The shuttle and the backplate toghether are modifiet to be at the same ticknes as the original Voron carriage. It uses pogo pins for making contact between shuttle and backplate. I eliminated the third pair of magnets couse the pogo pins magnets are strong enough to take the job. The problem i have is that it does not work with the toolchanger software from TapChanger creator "viesturz". The software uses the Z enstop for knowing what tool is active, so because klicky probe endstop stays on his support no tool can be made active. And the klicky routines for docking and undocking are no longer trigerret when a homing is called. So i post this here for whoever wants to try to do some coding, couse im not good at it. For now i have on my printer the shuttle and backplate mounted instead of classic voron carriage and its all ok. Its easier to just lift the toolhead from the shuttle and change a nozzle.... :) Because its all so tight the shuttle wireing its done like in the pictures. I just superglued the wires on the part ass shown in pictures. The pogo pins are also glued in place. You need: -This pogo pins - https://www.amazon.de/dp/B0BKPY29V7?psc=1&ref=ppx_yo2ov_dt_b_product_details -4x 4x60mm steel rods. -1x 50x10x0,4mm spring steel strip for the silicon pad, to keep the nozzle from oozing when parked -some silicon for molding the silicon pad. i use this and its amazing : https://www.amazon.de/dp/B01MZ7EO1V?ref=ppx_yo2ov_dt_b_product_details&th=1 -two heat inserts for the backplate.(the toolhead is mounted whit 4 screws. the upper screws are screwed direct in the printed part, the lover screws are screwed in the heat inserts. use 4x M3x8 screws) -n52 magnets -and other screws Printing: Use Voron specs and materials. I used 25% infill. I used for the most part build-in supports. They are shown in the pictures in yellow color on the printed parts. CAD file will be available as soon as I tidy all up. if I forgot something, please say. There are allot of pictures to guide you, but please ask your questions.
Statistics
Likes
0
Downloads
0