Sg116 Beast Max | RC-Car | Shock tower
Description
This is a rear shock tower for the sg116 beast max. It allows to use shocks with 72mm eye to eye distance like the ones for the wltoys 14001, without adding to much of an angle for the cvds. This should result in less wear on the drivetrain. I tapped a M2.5mm thread in there for some M2.5 screws. M3 should also work. To prevent the screws from loosening I also added some CA-glue in the thread. I lowered the shocks in the front to the length of the original shocks as their motion is limited by the steering linkage. The new piston provides some more dampening as my shocks arrived with just a washer in there. link to the shocks: https://de.aliexpress.com/item/1005004918562703.html?spm=a2g0o.order_list.order_list_main.4.37cb5c5fRj6zBA&gatewayAdapt=glo2deu#nav-specification Have fun printing and enjoy this beautiful RC!
Statistics
Likes
0
Downloads
1