Ceiling vent 150 to square adapter with grill
Description
I have a bathroom fan that currently extracts all moist air to the roof cavity with no way out but to sit there and eventually settle down on the insulation. I have decided to relocate the vent directly above the shower, get a decent inline extractor fan and connect it directly outside (through the little space I have between the rafters and brick wall). What's included here are; 1. Adapter that allows for 150mm diameter flexible pipe to 200mm x 50mm square exit 2. Extension (in case you can't quite fit the adapter in the space between the roof and the ceiling) - you can shrink or just cut to size like me. 3. The outside grill/vent blocks it all off so that insects, etc, don't get in. I recommend you put a fine mesh as well to protect it further. I printed the whole lot in PETG and then assembled it with some silicone (as I want all the moisture to drop out if collected) and not end up sitting in the pipe itself.
Statistics
Likes
0
Downloads
0