Energy chain channel for Bachinmaker 4050 laser cutter
Description
Energy chain mod for Bachinmaker 4050 laser cutter. These channels will allow you to modify your Bachinmaker 4050 laser cutter to use energy chain for the cable runs. Print files: Laser cutter energy chain channel.3mf - All the parts in one file Bed left.3mf - left hand channel for the Y axis 176mm channel - piece of channel for the gap between the end pieces (Y axis) Bed right.3mf - Right hand channel for the Y axis Transom left.3mf - Left hand channel for the X axis 67mm channel.3mf - piece of channel for the gap between the end pieces (X axis) Transom right - Right hand channel for the X axis 3 X 19 joiner pins - pins to join the channels together. You will need 12 of these. In addition to this print you will need About 1.25m of 10mm energy chain. 1 X approx. 2m 4pin to 6pin stepper motor cable 1 X approx. 2m 3pin PWM cable (I used a stepper motor cable and changed the ends) 1 X approx. 1.5m 4pin to 6pin stepper motor cable 4 X M6 X 25mm bolts (you can reuse the standard washers)
Statistics
Likes
0
Downloads
0