Boxy Sovol SV06 plus cooling duct for 5015 blower
Description
Hi there, I didn't find a fan duct for the 5015 fan that fits the Sovol SV06 plus, so I made one. It is boxy, but it shouldn't matter too much as the plenum is big, the airflow inside is rather slow and has little losses. The inside corners are rounded where needed. It comprises two parts, a plenum and a back flange where the blower is mounted. Both are bolted together. The flange provides bosses to receive heat-set metric inserts (M3) for this connection. The front is fixed with one M3 bolt after removal of the stock fan and mounting plate. The back slides into the grooves on the backplate of the printer head. Both parts print without supports when standing upright on the back mating surface (some bridging is needed, however). That's all. Please feel free to improve and remix. I included step files for that matter.
Statistics
Likes
0
Downloads
0