Anycubic Kobra 2 Plus Z Belt Tensioner
Description
This print trys to fix the weird behavior of Anycubic Kobra 2 Printers to run into infill, resulting in rattle noises or worse (using grid infill and max speed). If you came along the same Reddit posts like me looking for a solution, this print is for you :) Plus: you might want to have a look at your build plate screws as well. On my Plus-model (06/2024) they used different nuts and 3 of them were quite loose. I tightened the screws, put some Loctide on them and let the printer run through it's auto level programm. Grid is now printable at the high speeds (you can only access using their slicer -_-'). If all that won't help, stick to gyroid infill. Let's hope Anycubic will provide an update to their slicer programm, that deals with this common issue (EU 26/08/2024) 1x M6-30mm screw (min.) 2x 20x8x7 bearings (the print includes sleeves) 1x M6 nut (optional. the holes can be used as nuts) Good luck!
Statistics
Likes
0
Downloads
2