Timing belt mounts for Cobblebot
Description
Update! As Cobblebot Is Completely Shitty And Useless Printer Done By Two Arrogant Knobs And It Just Doesn'T Work As Advertised ... Well, It Just Doesn'T Work At All Without Loads Of Mods, I Have Moved The X&Y To The Top Frame And That Requires More Sturdy Mount ... So The Mount V2 Has Now Holes For Two M5 Screws Make Sure It Won'T Move When It Changes Directions. If There Will Be Anyone Interested, I Will Be Happy To Post Photos Of My Mods To A Separate Post, Just Let Me Know. Original Message: Just Received A Cobblebot From Kickstarter And Found Out Rhere Is A Couple Of Things I Don'T Like So Far ... I Have Bought A Couple Of Pulleys Instead Of Using The Ones Designed By Cobblebot. The Next Thing I Had No Idea How To Do Was How To Mount The X And Y Belts Onto The Rails So I Have Created These Two Holders. Holder One Is Designed To Be Mounted Using M5 Bolt Into The Rail And Holds The Belt ... Use A Couple Of Washers To Keep It Tight. The Other One Has Two "Wings So You Can Mount In Through The Hotend Mounts In The Middle Using Just Two Electrical Cable Ties. After Printing It On My Old Printer I Found That The Holes For M3 Tightening (Closing) Holes Are Too Small So I Used A Drill To Clean Them Nicely.
Statistics
Likes
4
Downloads
0