HyperX Quadcast 3/8-16 Boom Arm Adapter
Description
This is a simple adapter to mount your HyperX Quadcast/Quadcast S microphone to a 3/8-16 thread (typically found on boom arms). Uses the stock hardware and spacers used with the included base. Print with supports but set your overhang angle to like 80 degrees so it only applies to the top of the internal threads. Ensure no supports print inside the threads. You may need to play with horizontal expansion values in your slicer to fine-tune the boom arm thread fit, but 0.00mm worked for me.
Statistics
Likes
0
Downloads
0