K1C Lid Hanger
Description
Here's a pair of hangers for the K1C lid, you will need some additional screws to hold them to the frame. I used 2 off - M3x8 Cap heads to hold each bracket to the frame - be careful with these - too long and they interfere with the XY slides inside the machine. Then I used a 1 off M3x6 (steel) cap heads to provide something for the Lids magnets to hold to. You will need to tap the hole in the print to M3 for is to screw into (or use a soldering iron to melt it in). I've printed in Creality's Carbon filled PLA (hyper PLA-CF) and it works great. They will fit either side of the machine.
Statistics
Likes
0
Downloads
0