Nano FPV Tank
Description
<b> NANO FPV TANK Hi Here is my Nano FPV Tank with proportional speed contol and controlable LED lights that can fit in the palm of your hand! This tank is only 5.5x4x3cm! great for racing around the office or living room at high speed while having great contol around those hard to reach places and super bright lights when it gets dark! although made for a bit of fun, this tiny tank make a great inspection robot to see those places you never thought you'd get to! <b> For the full build guide please see my Instructables: https://www.instructables.com/Nano-FPV-Tank/ <b> Equipment need: • 1 x Nano Tank • 1 x Flysky FS2A 4 channel receiver (or equivalent receiver for your controller) • 2 x 1A bi-directional brushed ESC • 1 x AIO FPV 5.8g Camera • 1 x 100 - 300mAh LiPo Battery (to fit in a gap of 27x20x10mm) • 1 x 3 pole PCB slide switch • 1 x USB 1S LiPo charger • 1 x JST-XH Male plug (or equivalent to suit the charger) • 3D Printed parts – see below <b> Extra Optional Equipment: • 1 x 3-5V 2A PWM to On/Off Switch for controlling LED’s • 2 x 3-5V LED • 1 x JST-XH Male Plug (or one to match your AIO Camera if you don’t want to hard wire it in) <b> Tools Needed: If they have a * by them, they are not necessary but will make this build much easier if you have them available. • Philips (Crosshead) Screwdriver • A modelling knife • Small wire cutters • Wire strippers • A small file • Drill bits (and a drill) – 1mm or 1.5mm recommended • Soldering iron • Soldering wire • Glue gun & Glue • Super glue (or glue that is suitable for the plastic you are using on your 3d printed parts) • Heat-shrink tube of various sizes or electrical tape • A Small pair of Plyers* - when is having a small pair of plyers never useful? • A pair of tweezers* - makes fitting tiny components easy and great for holding tiny wires when soldering. • Double sided tape* - great for holding tiny components in place permanently or temporally. • Blue-Tac* - very useful for holding components and wires while soldering if you don’t have a soldering jig. <b> Print files: Complete Nano FPV Tank with LEDs Nano FPV Tank Main Body Nano FPV Tank Side Pods with LEDs Nano FPV Tank Side Pods NO LEDs <b> Non FPV Verson: Non FPV Cap Non FPV Extanded Cannon Non FPV Stubby Cannon <b> More accessoies to come soon!!
Statistics
Likes
2
Downloads
0