Ender 3 1/4" Camera Mount
Description
Remix of [Ender Camera Mount 1/4'' by Hadancdd](https://makerworld.com/en/models/558799) to improve printability. Base plate mounts to the printer using existing screws, and the camera is mounted to the arm with a 1/4" screw. A printable 1/4" is provided, but I used one I had spare since my printer didn't like the printable one. [Amazon](https://www.amazon.ca/SmallRig-Shaft-D-ring-Camera-Screw/dp/B006GB5MDW/ref=sr_1_5?sr=8-5) has them and you can probably find them elsewhere easily. Likewise, I added a printable shim, since the screw didn't tighten fully after my modifications. You could also use washers if you have them lying around. I am using a [generic Chinese webcam](https://www.amazon.ca/gp/product/B08TQY52JP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) which I find works well thanks to its height adjust (and from the photos the same one Hadancdd is using). The sellers change their shell company frequently but I found [one that should work](https://www.amazon.ca/Computer-Microphone-Streaming-Conference-Recording/dp/B08D9G5KKQ/ref=pd_ci_mcx_pspc_dp_d_2_t_1) and you can likely find them on AliExpress to save a buck. Just make sure it has a 1/4" camera mount and it will work. Finally, this isn't necessary, but I used some [graphite lube](https://www.amazon.ca/dp/B072WCY1CN) in the swivel joint, since I wanted it to move more easily.
Statistics
Likes
0
Downloads
0