Hisense dryer levelling foot
Description
I made this to replace a few lost levelling feet for my Hisense dryer after finding out they're about €10 a piece, which is more than I am willing to pay for a piece of plastic. I made it for the one I have (DHGA8013L), but while researching I found it fits many other dryers as well, Hisense, as well as many other brands. It's basically [this part](https://www.partsnl.nl/wasdroger-onderdelen/hisense/behuizing/stelpoot/hisense-stelpoot-581291-wasdroger), or [this part](https://spares4hisense.co.uk/foot-adjustable-foot-sp-2-gorenje), so check those out for a list of possible machines this fits. The one I made is different on the underside of the foot than the part in the links, because I copied the originals that came with my dryer. I printed it in ASA, but it should also work well in ABS, or PETG. I do not think PLA will be a good choice, because it will likely creep under the weight of the dryer, and fail after a while. Do print it with a brim, because there is not a lot of surface to stick to the bed (I found I definitely needed the brim for ASA). I printed with 100% infill, and I suggest you do too if you plan on this part lasting a while. I've provided a STEP file and an STL file to use directly in your slicer. If you'd like to modify the model, I made it in Onshape, and the original file can be found [here in their public cloud](https://cad.onshape.com/documents/b3b95d779fc88fb837c1669e/w/80d6367eec4575d8813af461/e/a6d8623c2aa0d8315df3c969?renderMode=0&uiState=66d9c672d65a207b016e9b8c). You will need an Onshape account: they're free and definitely worth every penny.
Statistics
Likes
0
Downloads
0