Mahjong Rack & Pusher (Extra Large)
Description
Extra large Mahjong racks and pushers. These are designed to fit the largest "Size 8" 39 mm × 30 mm × 23 mm (1+9⁄16 in × 1+3⁄16 in × 7⁄8 in) size [Mahjong tiles](https://en.wikipedia.org/wiki/Mahjong_tiles). In order to fit on on my printer (BambuLab X1C) the parts are split into 3 sections (a, b & c). There are also 2 variants of both rack part 'a' and pusher part 'a' to allow for embedding magnets directly in the print. The magnets are optional but help keep the pusher arm connected to the rack. You can also print the regular version and glue magnets in the recessed holes (or leave the magnets out entirely). The included slicer files have a pause at the correct place so that you can press a round [6 mm x 2 mm magnet](https://www.amazon.com/gp/product/B0CCXGGTLC/) in the hole before letting the printer print over the top of it to lock it in place. ## Parts * Mahjong rack A (regular & hidden magnet variants) * Mahjong rack B * Mahjong rack C * Mahjong tennons (print 4 of these to connect rack parts A, B & C) * Mahjong pusher A * Mahjong pusher B * Mahjong pusher C ## Files * STL files for each part * Sketchup source files for each part * Sketchup files for the entire rack and pusher as a single part * Slicer files for the hidden magnet variant with built in pauses to allow placing the magnets inside the model and printing over the top to embed them in the print
Statistics
Likes
0
Downloads
0