Crossbow RC Ornithopter Servo Conversion Mounting Bracket
Description
Servo conversion mounting bracket for Crossbow radio controlled ornithopters. This allows you to replace the conventional gearbox in the Crossbow or Crossbow 2 RC ornithopter, instead using two standard size servos to flap the wings. Hitec HSB-9360TH servos are recommended. Required hardware: Eight 4-40x3/8" flat head machine screws for mounting the servos to the bracket. Two 4-40x1/4" wide head machine screws for securing the side arms of the bracket to the sides of the fuselage. One 6-32X7/16" round head machine screw and washer for mounting the bracket to the front mounting hole in the bottom of the fuselage.
Statistics
Likes
0
Downloads
0