Ping Pong Ball Launcher
Description
I designed this ping pong ball launcher in Fusion 360. It was a fun project i created to learn how to better design, build, and program. This is an intermediate print, as you will need some basic knowledge of how to put parts together and wire a breadboard. Materials used: simple assorted M3 screws + bolts, 2 high torque servos, 1 normal 9gram servo, 1 esp8266, one brushless motor + speed controller(can be any old motor + speed controller), Lipo battery, jumper wires. All of these parts can be found for under 15 dollars on amazon, they are basic parts. The design is broken into modules to allow for easy low risk printing, and assembly is pretty easy if you have M3 screws. You will need supports for some of the prints. I attached the code, all you have to do is copy and paste it into an Arduino IDE, change Other than that, it is a pretty simple build just look at the images for reference on how to put it together. Thanks for checking out my project, it means a lot!
Statistics
Likes
0
Downloads
0