Deck box with commander display and magnetic sliding lid
Description
Deck box with room for 100 single sleeved (I'm using Dragon Shield) plus a small stack of tokens, likely able to fit double sleeved as well but I don't have any to test. Edges are rounded on the outside, has a nice "feel" when holding from the top or sides due to deep recesses in side panels. Commander is displayed on the front of the box in a toploader. Lid locks easily with 4x2mm magnets (https://www.amazon.com/dp/B0BW976MJV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). I cleaned up the magnet holes by lightly reaming the holes with a 5/32" drill bit (4mm would be ideal but I didn't have one), and then press fit, no glue necessary. Optimized to print with no supports.
Statistics
Likes
0
Downloads
0