Creality Sprite 4020 fan duct
Description
First of all, it's beautiful. The duct should be printed from ABS, ASA or Nylon (I printed from ABS-GF). The cover can be printed from any plastic, since it is not subject to significant thermal loads. For assembly, you will need screws: - 2 pieces M3x25 for attaching the cover to the duct; - 2 pieces M3x16 for attaching the fan; - 2 pieces M3x5-6 with a flat head!! (I had to grind down the head of the BHCS screw a little so that it would not rest against the CR-Touch case) It works quieter and cools much better than the original blower.
Statistics
Likes
0
Downloads
0