Rapid prototyping frame
Description
These are pieces I like to use to quickly make a shapes from cheap 16 mm PVC tubing. They friction fit, but you can glue them too. They are designed such that all the tubes intersect through a single point. If you do not like the angles or diameter size, go to [onshape](https://cad.onshape.com/documents/3a6b798a31b6736918dfe2a1/w/d8989a5d0a88394b18abff2c/e/b129065baefd63d215a934db?renderMode=0&uiState=65c7566f0df4f2144ad2b514) and change the parameters. If you need more acute angles than 90 degrees, also increase the insertion length parameter of the model. You can also change the diameter parameter, I added 0.2 mm for play. I uploaded a series of most useful angles. Keep in mind you might need to mirror parts in your slicer to get all the possible parts to make a cube.
Statistics
Likes
0
Downloads
0