Bike Handlebar Mount - Base
Description
I redid aylr's awesome handlebar mount to include two m4 screw holes at the top so it's even easier to design stuff to mount to it! bom: 1 m3x25 1 m4x40 + nuts changes: I changed around the design so that you can mount anything with 2 m4 screws to the flat side, the spacing is exactly 20mm and there is room for a couple of m4 nuts as well if desired, but the holes hold an m4 screw well already. I also made the hinge an m3 screw size with a little hole for a nut as well and redid the mounting hole so that an m4 nut fits well in it (it was already perfectly m4 sized but the nut cutout was too loose for what I had on me) I made this to compliment my other design of a Victagen bike headlight mount found here: ############# for the holes in the top I used 2 m4x12 screws with nuts
Statistics
Likes
0
Downloads
0