Fishing Lure Box with Lid
Description
This box is very lightweight. I printed it in Soda Pop Orange PETG because I didn't want the hot sun to be its demise. You can scale the box to any size you want to accommodate different sized lures. This one is only 100mm long, plus the lid. Whatever size you print the box, scale the lid to be 1mm larger on the X-axis and Y-axis, for a tighter fit. You may have to play with that dimension on your printer. Printed on the Bambu P1P with AMS. 0.4mm nozzle, 0.20mm layer height. I used a brim on the outside, 5mm wide, at a distance of 0.40mm from the box. Attaches just enough to come off very easily. Printed using the generic PETG settings on the P1P. NOTE* I cut the box in half vertically before printing using Bambu's slicer or PrusaSlicer also does a nice job of that. Cut it using the "dove-tail" option to make it really nice to glue the two halves back together after printing.
Statistics
Likes
0
Downloads
0