LED Sign Base
Description
# About - Just a base for your 100x100mm PMMA/LED signs - Uhhm, I know, the wiring I did is pretty ugly. :-D - For some reason TV won't accept my original SVG, so I uploaded a DXF # Additional things needed - USB cord - 5 blue LEDs - 33 ohms resistor - 100x100mm PMMA sheet # About engraving - I did this with my Indymill: 0.1mm V-shaped 30° engraving bit, 300mm/min, 0.1mm attack, 0.19mm deep
Statistics
Likes
0
Downloads
0