7 Wonders Box Organizer/Insert - All Expansions
Description
I needed an organizer so that I could put the base game and the Babel expansion in one box. I found the one I remixed that was designed for all expansions. I noted several comments that said that it didn't quite fit their box - slightly too large. When I measured, I found that it was about 3 mm too long in one direction - the direction of the long player board and Armada trays. We'll call that the y-axis. So, by making thiner walls in several of the trays, I was able to cut 3-5 mm off of the trays in the y-axis and now it fits my box. I also had to cut the 2 long trays into 2 parts to be able to print them on my Creality K1. They were too big for my build plate. Here are the changes I made from the original -Player board and Armada trays are 3-5 mm shorter -Player board and Armada trays have a 2-part version to be able to print on a smaller print bed -Armada token tray, 7 Wonders token tray, Babel token tray, and Bable tiles tray are all 3-5 mm shorter -Coin trays are 4 separate trays with lids You'll need to print 4 card trays and lids. I don't have all of the expansions, so I can't confirm that everything fits in them like it should. I don't think I changed anything that would make a component not fit, but it's possible. The card tray still needs improvement. There is only one section that is big enough to fit all of the cards from a single age without really forcing the cards in.
Statistics
Likes
0
Downloads
0