Toyota Tercel Glove Box Latch Button
Description
This was modeled based on an original Toyota Tercel 5th gen glove box latch. Additional parts required: Metal spring The actual locking mechanism Recommended printing settings (Based on OrcaSlicer): Precise Wall: On Precise Z Height: Optional Infill: 100% Wall loops: 3 Top and Bottom shell layers: 5 Supports: On (Normal; Snug, Rectilinear Grid) Raft (If printing ABS or ASA): 1 (Optional or use glue) Recommended Materials (Anything Heat Resistant): ABS, ASA, PETG, etc. Tolerances are really tight. You will need a precise printer and a quality filament. In the contrary just sand down the parts until they glide nicely. In the featured pictures I was using neither; so I had to sand them. In addition, they were printed in ASA and I vapor smooth them with acetone.
Statistics
Likes
0
Downloads
0