Chemical/Bottle Holder
Description
ABOUT: Didn't want to fuss with Gridfiniy and all the magnets. FEATURES: The large round 46mm insert is for a 8.oz Lucas White Lithium Grease The medium 43mm insert are for a 4.oz liquid Super Lube. The smaller 34mm insert is for a 2.oz Starbond super glue. The small 32mm inserts are for 1.oz needle bottles, and a 60.mL Bambu Lab Liquid Glue. The long horizontal insert is for a standard 7g/0.24 oz glue stick. There are also inserts for the StarBond Glue's nozzles, pin cap, and lid. HARDWARE NEEDED: (4) 33mm rubber feet for anti-skid purposes. PRINTING SUGGESTIONS: I would use PLA. It shouldn't take more than 3 Hours. I would do 10 Hex pattern infill. Supports are optional for the feet holes on the bottom. No brim is needed because of the large print surface. DISCLOSURES: No accessories included. FINAL THOUGHTS: Maybe someone will find this useful. Cheers! Visit my blog: https://www.scwd.us Visit my YouTube Channel: https://www.youtube.com/@SCWD_US
Statistics
Likes
0
Downloads
0