spacer for Dart Zone Aeon Pro X
Description
the Aeon Pro X is debatably the best budget pro blaster, it even has a mod pack by the manufacturer! but it turns out the mod pack is some spacers, or so it seems. I took off the stock attachment and checked out the spring one night, and noticed that the spring was WAY longer than the length of pull. so I designed a spacer and i’m pretty sure two of them (the gun can take two) get it to 200 fps. INSTRUCTIONS: unscrew the four (4) screws in the stock attachment point and remove it. inside you will see a twisting knob/rod that holds the spring in place. twist to remove (left, I think). the rod will slide out. place the spacers (it can hold up to 2) on the rod and reassemble.
Statistics
Likes
0
Downloads
0