Creality Sprite dual 4020 fan duct
Description
The duct should be printed from ABS, ASA or Nylon (I printed from ABS-CF). The duct collector can be printed from any plastic, since it is not subject to significant thermal loads. For assembly, you will need screws: - 2 pieces flathead M3x32 flathead for attaching the fans to the duct collector; - 1 pieces flathead M3x16, and 2 pieces countersunk M3x10 for connecting the collector to the duct; - 2 pieces M3x5-6 with a flat head!! (I had to grind down the head of the BHCS screw a little so that it would not rest against the CR-Touch case) I recommend buying better quality fans. The cheapest ones have case sizes that vary greatly even within the same batch. I bought this one from creality: https://sl.aliexpress.ru/p?key=KwDgrs4 _ Thanks to Kingsidorak for the step file of sprite assembly: https://grabcad.com/library/creality-sprite-extruder-work-in-progress-1
Statistics
Likes
0
Downloads
0