Scenario Box Inserts for My Father's Work (supports sleeved cards)
Description
After looking online for inserts for the scenario boxes in My Father's Work I found this design: https://www.printables.com/model/370074-my-fathers-work-le-secret-de-mon-pere-box-insert/comments However, that design doesn't support sleeved cards. So I decided to design my own solution. "BOTTOM_with_text" files have the name of the scenario on them for easier sorting. If you'd like to have blank parts don't print any of the "with_text" files. Once that's decided, print everything once (6 parts total). The sleeves I'm using are Mayday 7077's. Their thickness is 90 microns and they're advertised as "125% thicker" than their standard sleeves. Thinner sleeves/no sleeves may result in a less snug fit in the box (but should still work, especially if you just keep the box horizontal). A vertical shake test resulted in no pieces falling out of the inserts. IMPORTANT: I would advise to put the insert in with its bottom opposite the lid flap (see photo), in other words, on the half circle cut-out side. This makes it far easier to load the insert because it's less likely to snag on the inner fold of the box. You can also squeeze the box slightly to make sure it gets past the inner fold. Design is meant to be flush. The tokens for A Time of War's top tray need to be stacked somewhat neatly (see photo). If you just throw them loosely into the tray they usually sit too high. I hope you enjoy the prints! Happy gaming!
Statistics
Likes
0
Downloads
0