Crestron TSW-770 Table Stand Mount
Description
This is a Crestron TSW-770 Table-Top All in One Mount. i could not stomach paying the crazy prices for a table stand, so I made my own with some inspiration from MakramG and his Tsw-760 stand. Similar, but i reworked the open cavity to allow a 770 versus 760, adjusted some of the walls as I felt theirs was too thick for my taste. Print Standing up proper, i found no issues with this method. This does not require any additional hardware/inserts/mudrings/etc for TSW fitment. The touch panel slips into the cavity with little resistance, ensuring it will not just slip out, but allowing removal without issue. I had gone through a couple versions. This one has a big enough footprint to counter awkward center of balance. Has TWO cable entry holes, both large enough for standard cat6 heads. I was also asking for pain, so i designed this and printed it in ABS. I do not recommend this, I believe pla+ would be more than sufficient. The only reason why i did ABS was due to waiting for more PLA+ to come in. Anyway, if you do ABS i would highly suggest a raft. Supports are mandatory. ~50Degrees I threw some branding on the top skin for a custom look. I plan to make one for a 1070 as well. Possibly even a 750 as i have a couple of those laying around. Let me know if this helps, or if there are any requests. No promises, but i like a challenge.
Statistics
Likes
0
Downloads
0