A case for the LILYGO/TTGO LoRa32 V2.1_1.6 Board
Description
The main features of this enclosure are: - **Tightly assembled** with USB, SD and antenna connectors easily accessible. - The **LEDs are easily visible** through small holes in the enclosure. - The **power switch on the bottom** is easily accessible with a finger. - The **display is cleary visible**. - There are **dedicated holes** for attaching a string. - **No screws needed**; the *snap-joint* design allows the base and lid to "click" together without screws. - The **circuit board is neatly clamped** between the base standoffs and the lid push-downs, ensuring correct alignment, thanks to the antenna connector holder. - A dedicated space for an **optional rechargeable battery** with dimensions of of 4 cm x 3 cm x 0.9 cm. # Notes - To close or open the enclosure, gently press the base near the snap joints (in the center) with your fingers to facilitate the process, or use a small flathead screwdriver to free the lid from the joints. Be careful not to bend the lid during removal or insertion to avoid breaking the standoffs. # Model This model has been designed with [OpenSCAD](https://openscad.org/) and the fantastic library [YAPP_Box Yet Another Parametric Projectbox generator](https://github.com/mrWheel/YAPP_Box). The source code is available on my GitHub repository at [https://github.com/digiampietro/enclosure-ttgo-lora32](https://github.com/digiampietro/enclosure-ttgo-lora32).
Statistics
Likes
0
Downloads
0