T8 plus mini pc case
Description
Re-designed case for Firebat T8 plus or other T8 variant mini pc device. Air comes from the top of the device through the ssd slot and goes out on the back. This way the ssd also get cooling. No support needed. 25 % infill on main parts. 3 walls. 4 top and 4 bottom layer. 0.2 layer height. Rotate model to have the flat side on the bed. And seams should be on the back. I used 0.1 layer height for the very firs layer on my matte glass bed to have smooth finish. The power button can be nature/transparent. Cover place can be printed and glued. Suggest to print them with 0.1 and all walls. I used 2.5mm screws with metal inserts for the mainboard. Inserts glued in with epoxy. Bottom cover has 3mm screws directly into plastic. Editable original model can be found here: https://www.tinkercad.com/things/lcFUGZVHqHM-t8-plus-10
Statistics
Likes
0
Downloads
0